Detection Systems DS7060 Manuale Utente Scaricare il pdf (Pagina 21)

4/98

DS7060-AUS Reference Guide Copyright  1997-98 Detection Systems, Inc. Page 21

History Controls determine what events are

stored in the panels history buffer.

Custom Arming programming allows the [#] + [4]

key sequence on the keypad to be used for

custom arming. The programming determines

which zones will be bypassed (not armed) during

custom arming. Note: Custom Arming will send a

Partial Closed report if programmed to do so in

Address 31.

Zone Doubling adds three additional specific

zones to the control panel:

Zone 7 - Fire:

Supervised for use with 4-wire

smoke detectors.

Zone 8 - Tamper:

Supervised for use with

tamper switches.

Zone 9 - Keyswitch:

Supervised keyswitch

input. A momentary contact closure on this input

will toggle the panel between the armed and

disarmed states.

NOTE: The zone input wiring and End-Of-

Line resistors differ if Zone Doubling is

selected. Be sure to review Section 4.0,

Terminal Wiring, for the correct resistor

selections.

Expanded Zone Reports are used only if Zone

Doubling (see Address 55) is selected.

Expanded Zone Restorals are used only if Zone

Doubling (see Address 55) is selected.

1 2 ... 16 17 18 19 20 21 22 23 24

Nessun commento

Detection Systems DS7060 Manuale Utente Pagina 21